2014-2019 Hiace · Service Manual SECURITIES

DIAGNOSIS SYSTEM

Troubleshooting · Vehicles built Oct 2014 – Dec 2016

Versions by build date: Oct 2014 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017


DESCRIPTION
  1. The transponder key ECU assembly controls the immobiliser system. Immobiliser system data and Diagnostic Trouble Codes (DTCs) can be read through the vehicle Data Link Connector 3 (DLC3).


CHECK DLC3
  1. Check the DLC3 (Click here).


INSPECT BATTERY VOLTAGE
  1. Measure the battery voltage.

    Standard voltage:
    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery.

← TERMINALS OF ECU (from Jan 2015)DIAGNOSIS SYSTEM (Jan 2017 – Nov 2017) →