DIAGNOSIS SYSTEM
Troubleshooting · Vehicles built Jan 2015 – Mar 2016
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017
| DESCRIPTION |
The certification ECU (smart key ECU assembly) and ECM control the vehicle immobiliser system functions. Immobiliser system data and Diagnostic Trouble Codes (DTCs) can be read through the vehicle Data Link Connector 3 (DLC3).
In some cases, a malfunction may be occurring in the immobiliser system even though the security indicator light is not illuminated.
When the system seems to be malfunctioning, use the GTS to check for malfunctions and perform repairs.
| CHECK DLC3 |
Check the DLC3 (Click here).
| INSPECT BATTERY VOLTAGE |
Measure the battery voltage.
- Standard voltage:
- 11 to 14 V
| START FUNCTION PROBLEM SYMPTOMS |
| Symptom |
Suspected Area |
Component Malfunction |
Possible Output DTCs |
Related Data List Item |
| Engine cannot be started*1 |
Certification ECU (smart key ECU assembly) |
Open or short circuit inside ECU |
|
|
| ID code box (immobiliser code ECU) |
Open or short circuit inside ECU |
|
|
|
| ECM |
Open or short circuit inside ECU |
|
EFI Code Receive |
|
| ECD system |
ECM incompatible with installed immobiliser system |
B279C |
|
|
| Power source mode cannot be changed*1 |
Engine switch |
Open or short circuit inside switch |
B278A |
|
| Certification ECU (smart key ECU assembly) |
Open or short circuit inside ECU |
|
|
|
| Steering lock lock/unlock not possible*2 |
Steering lock ECU (steering lock actuator assembly) |
|
|
|
- *1: Refer to Problem Symptoms Table for Smart Entry and Start System (for Start Function) (Click here).
- *2: Refer to Problem Symptoms Table for Steering Lock System (Click here).