2014-2019 Hiace · Service Manual SECURITIES

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Oct 2014


CHECK FOR TRANSPONDER KEY ECU ASSEMBLY DTC
  1. Connect the GTS to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the GTS on.

  4. Enter the following menus: Body Electrical / Immobiliser / Trouble Codes.

  5. Check for DTCs.


CHECK FOR ECM DTC
  1. Connect the GTS to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the GTS on.

  4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.

  5. Check for DTCs.


CLEAR TRANSPONDER KEY ECU ASSEMBLY DTC
  1. Connect the GTS to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the GTS on.

  4. Enter the following menus: Body Electrical / Immobiliser / Trouble Codes / Clear DTCs.

  5. Clear the DTCs.


CLEAR ECM DTC
  1. Connect the GTS to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the GTS on.

  4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes / Clear DTCs.

  5. Clear the DTCs.

← DIAGNOSIS SYSTEM (from Dec 2017)DATA LIST / ACTIVE TEST (from Oct 2014) →