INSTALLATION
Removal / installation · Vehicles built Oct 2014 – Mar 2016
Versions by build date: Oct 2014 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
| 1. INSTALL STEERING PAD SWITCH LH |
Attach the 2 pins and guide to install the steering pad switch LH.
Install the screw.
Connect each connector.
| 2. INSTALL STEERING PAD |
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }
| 4. CHECK SRS WARNING LIGHT |
