2014-2019 Hiace · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jan 2017


INSPECT FAN AND GENERATOR V BELT

  1. B000543E13
    Check the belt for wear, cracks or other signs of damage.
    If any of the following defects is found, replace the fan and generator V belt.
    1. The fan and generator V belt is cracked.
    2. The fan and generator V belt is worn out to the extent that the cords are exposed.
    3. The fan and generator V belt has chunks missing from the ribs.

  1. B075171E15
    Check that the fan and generator V belt fits properly in the ribbed grooves.
    Text in Illustration 
    *a
    CORRECT
    *b
    INCORRECT

    HINT:
    Check with your hand to confirm that the fan and generator V belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the fan and generator V belt. Install a new fan and generator V belt correctly.


INSPECT V-RIBBED BELT TENSIONER ASSEMBLY
  1. Remove the fan and generator V belt. (Click here)

  1. A399636
    Check that nothing gets caught in the V-ribbed belt tensioner assembly by turning it clockwise and counterclockwise.
    If a malfunction exists, replace the V-ribbed belt tensioner assembly.

  1. A399637E01
    Turn the pulley, and check that the tensioner bearing moves smoothly and quietly.
    Text in Illustration 
    *a
    Turn
    If necessary, replace the tensioner pulley.

  1. Install the fan and generator V belt (Click here).

← COMPONENTS (from Jan 2017)REMOVAL (from Jan 2017) →