2014-2019 Hiace · Service Manual COMMUNICATION SYSTEM

HOW TO PROCEED WITH TROUBLESHOOTING

Troubleshooting · Vehicles built Jan 2015 – Mar 2016

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 from Apr 2016

HINT:
  1. Use these procedures to troubleshoot the LIN communication system.
  2. *: Use the GTS.


1.VEHICLE BROUGHT TO WORKSHOP
    NEXT

    2.INSPECT BATTERY VOLTAGE

      Standard voltage:
      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery before proceeding.
    NEXT

    3.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
    1. Using the GTS, inspect the CAN communication function to ensure there are no malfunctions in the communication system.

    2. Result 
      Result
      Proceed to
      No DTCs output
      A
      DTCs output
      B

    B.
    A

    4.CHECK COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*
    1. Using the GTS, inspect the LIN communication function to ensure there are no malfunctions in the communication system.

      Result 
      Result
      Proceed to
      No DTCs output
      A
      DTCs output
      B


    B.
    A

    5.OVERALL ANALYSIS AND TROUBLESHOOTING
    1. Terminals of ECU (Click here)

    NEXT

    6.ADJUST, REPAIR OR REPLACE
      NEXT

      ← HOW TO PROCEED WITH TROUBLESHOOTING (Oct 2014 – Dec 2014)HOW TO PROCEED WITH TROUBLESHOOTING (from Apr 2016) →