REMOVAL
Removal / installation · Vehicles built from Jan 2017
| 1.
DISCONNECT OIL COOLER HOSE
|
 |
- Detach the 2 clamps and disconnect the oil cooler hose from the fan shroud.
Slide the 2 clamps and disconnect the 2 oil cooler hoses from the 2 oil cooler tubes.
| 2.
REMOVE FAN BRACKET SUB-ASSEMBLY
|
 |
- Detach the clamp and remove the 2 bolts, 2 nuts and fan bracket sub-assembly.
| 3.
REMOVE FAN SHROUD
|
 |
- Detach the 2 clamps and disconnect the 2 connectors.
- Remove the 6 bolts and fan shroud from the underside of the vehicle.
| 4.
REMOVE NO. 1 FAN |
 |
- Remove the 3 screws and No. 1 fan from the No. 1 cooling fan motor.
| 5.
REMOVE NO. 2 FAN |
 |
- Remove the 3 screws and No. 2 fan from the No. 2 cooling fan motor.
| 6.
REMOVE NO. 1 COOLING FAN MOTOR |
 |
Remove the 5 screws and No. 1 cooling fan motor from the fan shroud.
| 7.
REMOVE NO. 2 COOLING FAN MOTOR |
 |
Remove the 5 screws and No. 2 cooling fan motor from the fan shroud.