2014-2019 Hiace · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Jan 2017


1. INSTALL NO. 2 COOLING FAN MOTOR
  1. Install the No. 2 cooling fan motor to the fan shroud with the 5 screws.

    Torque:
    3.9 N*m{ 40 kgf*cm , 34 in.*lbf }


2. INSTALL NO. 1 COOLING FAN MOTOR
  1. Install the No. 1 cooling fan motor to the fan shroud with the 5 screws.

    Torque:
    3.9 N*m{ 40 kgf*cm , 34 in.*lbf }


3. INSTALL NO. 2 FAN
  1. Install the No. 2 fan to the No. 2 cooling fan motor with the 3 screws.

    Torque:
    3.9 N*m{ 40 kgf*cm , 34 in.*lbf }


4. INSTALL NO. 1 FAN
  1. Install the No. 1 fan to the cooling fan motor with the 3 screws.

    Torque:
    3.9 N*m{ 40 kgf*cm , 34 in.*lbf }


5. INSTALL FAN BRACKET SUB-ASSEMBLY
  1. Install the fan bracket sub-assembly with the 2 bolts and 2 nuts.

    Torque:
    20 N*m{ 199 kgf*cm , 14 ft.*lbf }

  1. Attach the clamp.


6. CONNECT OIL COOLER HOSE
  1. Connect the 2 oil cooler hoses to the 2 oil cooler tubes, and slide the 2 hose clamps to secure the hoses.

  1. Attach the 2 clamps and connect the oil cooler hose to the fan shroud.


7. INSPECT AUTOMATIC TRANSMISSION FLUID LEVEL

8. INSPECT FOR FLUID LEAK
← REMOVAL (from Jan 2017)ON-VEHICLE INSPECTION (from Jan 2017) →