2014-2019 Hiace · Service Manual SERVICE SPECIFICATIONS

SERVICE DATA

Specifications · Vehicles built from Jan 2015

Versions by build date: Oct 2014 – Dec 2014 from Jan 2015

CHARGING SYSTEM 
Battery
Standard gravity
1.25 to 1.29 at 20°C (68°F)
Standard voltage
1.26 to 1.28 V at 20°C (68°F)
Fuse
Standard resistance
Below 1 Ω
Charging circuit without load
Standard current
10 A or higher
Standard voltage
10.275 to 16.25 V
(when engine speed at 2000 rpm)
Charging circuit with load
Standard current
30 A or higher
GENERATOR 
Generator brush holder assembly
Standard exposed length
9.5 to 11.5 mm (0.374 to 0.453 in.)
Minimum exposed length
4.5 mm (0.177 in.)
Generator rotor assembly
Standard resistance
Slip ring - Slip ring
1.55 to 1.95 at 20°C (68°F)
Slip ring - Rotor core
10 kΩ higher
Slip ring diameter
Standard diameter
14.2 to 14.4 mm (0.559 to 0.567 in.)
Minimum diameter
14.0 mm (0.551 in.)
BATTERY CURRENT SENSOR 
Battery current sensor
Standard resistance
2 (VC5) - 4 (E2)
0.1 to 10 kΩ
2 (VC5) - 3 (IB)
0.5 kΩ or less
3 (IB) - 4 (E2)
0.05 to 10 kΩ
Battery thermometer sensor
Standard resistance
1.5 to 2.5 kΩ
← SERVICE DATA (Oct 2014 – Dec 2014)TORQUE SPECIFICATIONS (Oct 2014 – Dec 2014) →