2014-2019 Hiace · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Jan 2015 – Nov 2015

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Nov 2015


1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE NO. 2 ENGINE UNDER COVER
  1. Remove the 6 bolts and No. 2 engine under cover.


4. REMOVE ENGINE SIDE UNDER COVER LH

5. REMOVE ENGINE SIDE UNDER COVER RH

6. REMOVE STARTER ASSEMBLY

  1. A282593
    Open the terminal cap.

  1. Disconnect the starter connector.

  1. Remove the nut and disconnect the starter wire.

  1. A282594
    Remove the bolt and disconnect the wiring harness clamp bracket.

  1. Remove the nut and stater assembly.

← REMOVAL (Oct 2014 – Dec 2014)DISASSEMBLY (Oct 2014 – Nov 2015) →