2014-2019 Hiace · Service Manual ENGINE

DISASSEMBLY

Removal / installation · Vehicles built Oct 2014 – Nov 2015


1. REMOVE STARTER YOKE ASSEMBLY

  1. A102599
    Remove the nut and disconnect the lead wire from terminal C.

  1. Remove the 2 bolts.

  1. Pull out the starter yoke together with the starter armature from the magnet starter switch.


2. REMOVE MAGNET STARTER SWITCH ASSEMBLY

  1. A102600
    Remove the 3 screws and magnet starter switch.

  1. A102601E01
    Remove the return spring, pinion gear, idler gear, clutch roller, retainer and starter clutch from the starter housing.
    Text in Illustration 
    *1
    Return Spring
    *2
    Pinion Gear
    *3
    Idler Gear
    *4
    Clutch Roller
    *5
    Retainer
    *6
    Starter Clutch
    *7
    Starter Housing

  1. A197146E03
    Using a magnet hand, remove the steel ball from the clutch shaft hole.
    Text in Illustration 
    *1
    Magnet Hand


3. REMOVE STARTER BRUSH HOLDER ASSEMBLY

  1. A102621
    Disconnect the 4 starter yoke brushes from the starter brush holder.

    1. Using a screwdriver, pull back the spring.

    2. Disconnect the brush from the starter brush holder.

  1. Remove the 4 screws and 4 brushes from the starter brush holder.

  1. Remove the starter brush holder from the starter yoke.

  1. Remove the O-ring.


4. REMOVE STARTER ARMATURE ASSEMBLY
  1. Place matchmarks on the starter yoke and commutator end frame.

  1. Remove the starter armature together with the commutator end frame.

  1. Remove the O-ring.

  1. A102604
    Using a plastic-faced hammer, tap the commutator end frame to remove the starter armature from the commutator end frame.

← REMOVAL (Jan 2015 – Nov 2015)INSPECTION (Oct 2014 – Nov 2015) →