2014-2019 Hiace · Service Manual COMMUNICATION SYSTEM

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Oct 2014

HINT:
Refer to the GTS operator's manual for further details.


CHECK DTC
  1. Connect the GTS to the DLC3.

  2. Turn the engine switch on (IG) and turn the GTS on.

  3. Enter the following menus: Body Electrical / (desired system) / Trouble Codes.

  4. Read the DTCs by following the directions on the screen.


CLEAR DTC
  1. Connect the GTS to the DLC3.

  2. Turn the engine switch on (IG) and turn the GTS on.

  3. Enter the following menus: Body Electrical / (desired system) / Trouble Codes.

  4. Clear the DTCs by following the directions on the screen.

← TERMINALS OF ECU (from Oct 2014)DIAGNOSTIC TROUBLE CODE CHART (Oct 2014 – Dec 2014) →