INSTALLATION
Removal / installation · Vehicles built Jan 2015 – Mar 2016
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
| 1. INSTALL INTAKE AIR TEMPERATURE SENSOR |
Install a new gasket to the intake air temperature sensor.
Using a 22 mm ball joint lock nut wrench, install the intake air temperature sensor.
- Torque:
- 34 N*m{ 350 kgf*cm , 25 ft.*lbf }
- NOTICE:
- Use the formula to calculate special torque values for situations where a ball joint lock nut wrench is combined with a torque wrench (Click here).
Connect the intake air temperature sensor connector.
