2014-2019 Hiace · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Jan 2017

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1. INSTALL INTAKE AIR TEMPERATURE SENSOR
  1. Install a new gasket to the intake air temperature sensor.

  1. Using a 22 mm ball joint lock nut wrench, install the intake air temperature sensor.

    Torque:
    34 N*m{ 350 kgf*cm , 25 ft.*lbf }

    NOTICE:
    Use the formula to calculate special torque values for situations where a ball joint lock nut wrench is combined with a torque wrench (Click here).

  1. Connect the intake air temperature sensor connector.

← INSTALLATION (Apr 2016 – Dec 2016)COMPONENTS (from Oct 2014) →