REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 1.
DISCONNECT VANE PUMP OIL RESERVOIR ASSEMBLY |
 |
- Remove the 2 bolts and disconnect the vane pump oil reservoir.
| 2.
REMOVE NO. 4 AIR HOSE |
 |
- Loosen the 2 hose clamps.
Remove the No. 4 air hose.
| 3.
REMOVE DIESEL THROTTLE BODY ASSEMBLY |
 |
w/o DPF:
- Disconnect the diesel turbo pressure sensor connector and vacuum switching valve connector.
Remove the bolt and disconnect the wire harness clamp.
Disconnect the 2 diesel throttle body connectors.
- Remove the 2 bolts, 2 nuts, diesel throttle body and gasket.