2014-2019 Hiace · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Oct 2014 – Dec 2014

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1. INSTALL CRANKSHAFT POSITION SENSOR

A102906
  1. Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.

  1. A151576
    Install the crankshaft position sensor with the bolt.

    Torque:
    8.5 N*m{ 87 kgf*cm , 75 in.*lbf }

    NOTICE:
    Do not crack or jam the O-ring when installing the crankshaft position sensor.

  1. Connect the 3 wire harness clamps.

  1. A102284
    Connect the crankshaft position sensor to the No. 1 vacuum pipe.

  1. Connect the crankshaft position sensor connector.


2. INSTALL VANE PUMP OIL RESERVOIR ASSEMBLY
  1. Connect the vane pump oil reservoir with the 2 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }


4. PERFORM INITIALIZATION
  1. Perform initialization procedures (Click here).

    NOTICE:
    Certain systems need to be initialized after reconnecting the cable to the negative (-) battery terminal.

← INSPECTION (from Oct 2014)INSTALLATION (Jan 2015 – Mar 2016) →