INSTALLATION
Removal / installation · Vehicles built from Oct 2014
| 1. INSTALL MASS AIR FLOW METER |
Install the mass air flow meter with the 2 screws.
- Torque:
- 1.0 N*m{ 10 kgf*cm , 9 in.*lbf }
| 2. INSTALL AIR CLEANER WITH HOSE |
Attach the wire harness clamp and connect the mass air flow meter connector.
Install the air cleaner with hose with the 3 bolts.
- Torque:
- 18 N*m{ 178 kgf*cm , 13 ft.*lbf }
Tighten the hose clamp.
| 3. INSTALL NO. 1 AIR CLEANER INLET |
Install the No. 1 air cleaner inlet with the bolt.
- Torque:
- 18 N*m{ 178 kgf*cm , 13 ft.*lbf }
| 4. INSTALL HEADLIGHT ASSEMBLY RH |
| 5. INSTALL FRONT BUMPER |
- for Standard Body (Click here)
- for Wide Body (Click here)
