2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT INJECTOR ASSEMBLY
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    0.42 to 0.52 Ω

    If the result is not as specified, replace the injector assembly.

← REMOVAL (from Oct 2014)INSTALLATION (Oct 2014 – Dec 2014) →