INSTALLATION
Removal / installation · Vehicles built from Oct 2014
| 1. INSTALL INJECTOR DRIVER BRACKET |
Install the injector driver bracket with the 4 screws.
- Torque:
- 2.0 N*m{ 20 kgf*cm , 18 in.*lbf }
| 2. INSTALL INJECTOR DRIVER ASSEMBLY |
Install the injector driver assembly with the 2 nuts.
- Torque:
- 8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
Connect the 3 injector driver connectors.
| 3. INSTALL SUB BATTERY (for Cold Area Specification Vehicles) |
Install the sub battery.
Install the battery clamp with the nut.
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }
Connect the cable to the positive (+) battery terminal.
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 5. INSTALL BATTERY SERVICE HOLE COVER |
