REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 1. REMOVE BATTERY SERVICE HOLE COVER |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE SUB BATTERY (for Cold Area Specification Vehicles) |
Disconnect the cable from the positive (+) battery terminal.
Remove the nut and battery clamp.
Remove the sub battery.
| 4. REMOVE INJECTOR DRIVER ASSEMBLY |
Disconnect the 3 injector driver connectors.

Remove the 2 nuts and injector driver assembly.
| 5. REMOVE INJECTOR DRIVER BRACKET |
Remove the 4 screws and injector driver bracket from the injector driver.

