2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT COMMON RAIL ASSEMBLY

  1. A075928E01
    Inspect the fuel pressure sensor.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      2 - 3
      25°C (77°F)
      16.4 kΩ or less
      5 - 4
      25°C (77°F)
      16.4 kΩ or less
      1 - 2
      25°C (77°F)
      3 kΩ or less
      6 - 5
      25°C (77°F)
      3 kΩ or less

      If the result is not as specified, replace the common rail assembly.

  1. Inspect the pressure discharge valve.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      20°C (68°F)
      0.85 to 1.05 Ω

      If the result is not as specified, replace the common rail assembly.

← REMOVAL (from Oct 2014)INSTALLATION (Oct 2014 – Dec 2014) →