REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
|
| 2.
REMOVE REAR DOOR SCUFF PLATE LH
|
 |
- Disengage the claw and 12 clips.
Disconnect the connector and remove the rear door scuff plate.
| 3.
REMOVE SIDE STEP REAR SUPPORT LH
|
 |
Remove the 3 bolts and the side step rear support.
| 4.
REMOVE DOOR CONTROL RELAY ASSEMBLY
|
 |
Disconnect the connectors.
Remove the bolt and the door control relay.
| 5.
SEPARATE REAR NO. 2 DOOR WIRE |
 |
- Remove the bolt.
- Disconnect the connector from the vehicle.
| 6.
REMOVE POWER SLIDE DOOR MOTOR ASSEMBLY |
 |
- Remove the 2 bolts.
- Remove the bolt and the slide door lower rail plate.
Remove the slide door lower roller assembly LH from the belt bracket of the power slide door motor assembly.
- Remove the 2 grommets.
- Remove the 10 bolts and the power slide door motor.