2014-2019 Hiace · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Oct 2014


1. DRAIN ENGINE COOLANT

2. REMOVE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY (for Automatic Transmission)

  1. A233163
    Remove the 2 bolts and transmission oil filler tube.

  1. Remove the O-ring from the transmission oil filler tube.


3. DISCONNECT WATER BY-PASS HOSE

  1. A233157
    Disconnect the 2 water by-pass hoses.


4. DISCONNECT WIRING HARNESS CONNECTOR

  1. A233160
    Disconnect the wiring harness connector and detach the clamp.


5. REMOVE EGR VALVE BRACKET

  1. A233162
    Remove the 2 bolts and EGR valve bracket.


6. REMOVE NO. 2 EGR PIPE SUB-ASSEMBLY

  1. A233158
    Remove the 3 bolts, 2 nuts and No. 2 EGR pipe.

  1. Remove the 2 gaskets.


7. REMOVE ELECTRIC EGR CONTROL VALVE ASSEMBLY

  1. A242356
    Remove the 2 stud bolts, electric EGR control valve.

  1. Remove the wiring harness connector from the electric EGR control valve.

← COMPONENTS (from Oct 2014)INSPECTION (from Oct 2014) →