2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT EXHAUST GAS TEMPERATURE SENSOR
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    50°C (122°F)
    82 to 137 kΩ

    HINT:
    The temperature indicated under "Condition" is the temperature of the exhaust gas temperature sensor.

    If the result is not as specified, replace the exhaust gas temperature sensor.


INSPECT NO. 2 EXHAUST GAS TEMPERATURE SENSOR
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    50°C (122°F)
    82 to 137 kΩ

    HINT:
    The temperature indicated under "Condition" is the temperature of the exhaust gas temperature sensor.

    If the result is not as specified, replace the No. 2 exhaust gas temperature sensor.


INSPECT NO. 3 EXHAUST GAS TEMPERATURE SENSOR
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    50°C (122°F)
    82 to 137 kΩ

    HINT:
    The temperature indicated under "Condition" is the temperature of the exhaust gas temperature sensor.

    If the result is not as specified, replace the No. 3 exhaust gas temperature sensor.

← REMOVAL (from Apr 2016)INSTALLATION (Oct 2014 – Mar 2016) →