HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built Jan 2015 – Nov 2017
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Nov 2017 from Dec 2017
- HINT:
- Use these procedures to troubleshoot the rear view monitor system.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.INSPECT BATTERY VOLTAGE |
- Standard voltage:
- 11 to 14 V
| |||||
| 3.CUSTOMER PROBLEM ANALYSIS |
| |||||
| 4.PROBLEM SYMPTOM CONFIRMATION |
| |||||
| 5.PROBLEM SYMPTOMS TABLE |
Refer to Problem Symptoms Table (Click here).
Result Result
Proceed to
Fault is not listed in Problem Symptoms Table
A
Fault is listed in Problem Symptoms Table
B
|
|||||
| |||||
| 6.OVERALL ANALYSIS AND TROUBLESHOOTING |
Terminals of ECU (Click here).
| |||||
| 7.ADJUST, REPAIR OR REPLACE |
| |||||
| 8.CONFIRMATION TEST |
| |||||