2014-2019 Hiace · Service Manual CRUISE CONTROL SYSTEM

TC and CG Terminal Circuit

Circuit diagnosis · Vehicles built Oct 2014 – Dec 2014

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Nov 2015 Dec 2015 – Mar 2016 Apr 2016 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017

WIRING DIAGRAM

E290586E03

INSPECTION PROCEDURE


1. CHECK HARNESS AND CONNECTOR (DLC3 - ECM AND BODY GROUND)
  1. Disconnect the B72*1 or B71*2 ECM connector.

    1. *1: for 1KD-FTV
    2. *2: for 2TR-FE

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    for 1KD-FTV 
    Tester Connection
    Condition
    Specified Condition
    H23-13 (TC) - B72-26 (TC)
    Always
    Below 1 Ω
    H23-4 (CG) - Body ground
    H23-13 (TC) - Body ground
    Always
    10 kΩ or higher
    for 2TR-FE 
    Tester Connection
    Condition
    Specified Condition
    H23-13 (TC) - B71-41 (TC)
    Always
    Below 1 Ω
    H23-4 (CG) - Body ground
    H23-13 (TC) - Body ground
    Always
    10 kΩ or higher



NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Cruise SET Indicator Light Circuit (from Dec 2017)TC and CG Terminal Circuit (Jan 2015 – Nov 2015) →