TC and CG Terminal Circuit
Circuit diagnosis · Vehicles built Jan 2015 – Nov 2015
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Nov 2015 Dec 2015 – Mar 2016 Apr 2016 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017
WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. CHECK HARNESS AND CONNECTOR (DLC3 - ECM AND BODY GROUND) |
Disconnect the B72*1 or B71*2 ECM connector.
- *1: for 1KD-FTV
- *2: for 2TR-FE
- *1: for 1KD-FTV
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
for 1KD-FTV Tester Connection
Condition
Specified Condition
H23-13 (TC) - B72-26 (TC)
Always
Below 1 Ω
H23-4 (CG) - Body ground
H23-13 (TC) - Body ground
Always
10 kΩ or higher
for 2TR-FE Tester Connection
Condition
Specified Condition
H23-13 (TC) - B71-41 (TC)
Always
Below 1 Ω
H23-4 (CG) - Body ground
H23-13 (TC) - Body ground
Always
10 kΩ or higher
|
|
||||
| OK | ||
| ||
