REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 1. DRAIN ENGINE OIL |
Remove the oil filler cap.
Remove the oil pan drain plug and gasket, and then drain the engine oil into a container.
Wipe the oil pan and oil pan drain plug.
Install a new gasket and the oil pan drain plug.
- Torque:
- 34 N*m{ 347 kgf*cm , 25 ft.*lbf }
| 2. REMOVE OIL PRESSURE SWITCHING VALVE ASSEMBLY |
Disconnect the oil pressure switching valve connector.

Remove the bolt and oil pressure switching valve.
