2014-2019 Hiace · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Oct 2014 – Dec 2014

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1. INSTALL NO. 2 GLOW PLUG CONTROLLER BRACKET
  1. Install the No. 2 glow plug controller bracket to the glow plug controller with the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }


2. INSTALL NO. 1 GLOW PLUG CONTROLLER BRACKET
  1. Install the No. 1 glow plug controller bracket to the glow plug controller with the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }


3. INSTALL GLOW PLUG CONTROLLER
  1. Install the glow plug controller with the 2 nuts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the 4 connectors to the glow plug controller.


4. INSTALL BATTERY SERVICE HOLE COVER

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← REMOVAL (from Oct 2014)INSTALLATION (Jan 2015 – Mar 2016) →