REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 1. REMOVE NO. 2 ENGINE SERVICE HOLE COVER (for Standard Body) |
Detach the clips and fold back the carpet.
Remove the 3 bolts and No. 2 engine service hole cover.

| 2. REMOVE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY (for Automatic Transmission) |
Remove the 2 bolts and transmission oil filler tube sub-assembly.

Remove the O-ring from the oil filler tube sub-assembly.
| 3. REMOVE VACUUM SWITCHING VALVE ASSEMBLY |
Disconnect the connector from the electric EGR control valve.

Detach the clamp and wire harness.
Disconnect the connector and vacuum hose from the vacuum switching valve.

Remove the bolt and vacuum switching valve.
