INSTALLATION
Removal / installation · Vehicles built from Jan 2017
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
| 1. INSTALL AIR FUEL RATIO SENSOR |
Using SST, install the air fuel ratio sensor to the front exhaust pipe.

- SST
- 09224-00010
- Torque:
- without SST:
- 44 N*m{ 449 kgf*cm , 32 ft.*lbf }
- with SST:
- 39 N*m{ 402 kgf*cm , 29 ft.*lbf }
- HINT:
- Use a torque wrench with a fulcrum length of 30 cm (11.8 in.). When using a torque wrench with a fulcrum length that is not 30 cm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification (Click here).
- Make sure SST and the wrench are connected in a straight line.
- Use a torque wrench with a fulcrum length of 30 cm (11.8 in.). When using a torque wrench with a fulcrum length that is not 30 cm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification (Click here).
Connect the air fuel ratio sensor connector and attach the clamp.
| 2. INSTALL AIR TUBE COVER |
Attach the 2 clips and clamp.
Install the air tube cover with the 2 bolts.
- Torque:
- 20 N*m{ 199 kgf*cm , 14 ft.*lbf }
| 3. PERFORM AIR FUEL RATIO SENSOR COMPENSATION RESET |
