2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jan 2017


INSPECT AIR FUEL RATIO SENSOR

  1. A332545E02
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 (HA1A) - 2 (+B)
    20°C (68°F)
    1.6 to 3.2 Ω
    3(A1A+) - 4(A1A-)
    Always
    10 kΩ or higher

    Text in Illustration 
    *a
    Component without harness connected
    (Air Fuel Ratio Sensor)
    If the result is not as specified, replace the air fuel ratio sensor.

← REMOVAL (from Jan 2017)INSTALLATION (from Jan 2017) →