INSTALLATION
Removal / installation · Vehicles built from Jan 2017
- HINT:
- Perform "Inspection After Repairs" after replacing the air fuel ratio sensor (Click here).
| 1. INSTALL AIR FUEL RATIO SENSOR |
- HINT:
- Perform "Inspection After Repairs" after replacing the air fuel ratio sensor (Click here).
Using SST, install the air fuel ratio sensor to the front exhaust pipe.

- SST
- 09224-00012
- Torque:
- Specified tightening torque:
- 44 N*m{ 449 kgf*cm , 32 ft.*lbf }
Text in Illustration *a
Torque Wrench Fulcrum Length
- HINT:
- Calculate the torque wrench reading when changing the fulcrum length of the torque wrench (Click here).
- When using SST (fulcrum length of 30 mm (1.18 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)): 38 N*m (384 kgf*cm, 28 ft.*lbf)
- Calculate the torque wrench reading when changing the fulcrum length of the torque wrench (Click here).
Connect the connector.
