INSTALLATION
Removal / installation · Vehicles built from Jan 2017
Versions by build date: Oct 2014 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
| 1. INSTALL HEATER SWITCH ASSEMBLY (w/ Hot Gas Heater) |
Attach the 2 claws to install the heater switch assembly to the instrument cluster finish panel sub-assembly lower center.
| 2. INSTALL IDLE UP SWITCH (w/o Hot Gas Heater) |
Attach the 2 claws to install the idle up switch to the instrument panel finish panel lower center.
| 3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER (for LHD) |
| 4. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER CENTER (for RHD) |
Attach the 8 claws to install the instrument panel finish panel lower center.
| 5. INSTALL SHIFTING HOLE COVER ASSEMBLY (for RHD) |
for Manual Transmission:
Attach the 6 claws to install the shifting hole cover assembly.
for Automatic Transmission:
Attach the 8 claws to install the shifting hole cover assembly.
| 6. INSTALL SHIFT LEVER KNOB (for RHD) |
| 7. INSTALL PARKING BRAKE HOLE COVER (for RHD) |
Attach the 6 claws to install the parking brake hole cover.
| 8. INSTALL INSTRUMENT PANEL NO. 1 UNDER COVER SUB-ASSEMBLY (for RHD) |
Attach the 3 claws to instrument panel under cover sub-assembly No. 1.
Install the the 2 clips.
| 9. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER (for RHD) |
Connect the fuel lid lock control cable and bonnet (hood) control cable assembly to the instrument panel finish lower.
Attach the 4 clips to install the instrument panel finish panel lower.
Install the 2 clips.
