2014-2019 Hiace · Service Manual HEATER & AIR CONDITIONING SYSTEM

REMOVAL

Removal / installation · Vehicles built Apr 2016 – Dec 2016

Versions by build date: Oct 2014 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER (for LHD)
(Click here)

2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER (for RHD)

  1. B365544
    Using a clip remover, remove the 2 clips.

  1. Detach the 4 clips and remove the instrument panel finish lower.

  1. Disconnect each connector.

  1. B102838
    Push the positions indicated by the arrows in the illustration to disconnect the fuel lid lock control cable and bonnet (hood) control cable assembly from the instrument panel finish lower.


3. REMOVE INSTRUMENT PANEL NO. 1 UNDER COVER SUB-ASSEMBLY (for RHD)

  1. B365546
    Using a clip remover, remove the 2 clips

  1. Detach the 3 claws and remove the instrument panel under cover sub-assembly No. 1.


4. REMOVE PARKING BRAKE HOLE COVER (for RHD)

  1. B365547
    Detach the 6 claws and remove the parking brake hole cover.

  1. Disconnect each connector.


5. REMOVE SHIFT LEVER KNOB (for RHD)

  1. B365548E01
    Turn the shift lever knob in the direction indicated by the arrow and remove it.
    Text in Illustration 
    *A
    for Manual Transmission
    *B
    for Automatic Transmission


6. REMOVE SHIFTING HOLE COVER ASSEMBLY (for RHD)

  1. B365550E01
    for Manual Transmission:
    Detach the 6 claws and remove the shifting hole cover assembly.
    Text in Illustration 
    *A
    for Manual Transmission
    *B
    for Automatic Transmission

  1. for Automatic Transmission:
    Detach the 8 claws and remove the shifting hole cover assembly.


7. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER (for RHD)

  1. B365551E01
    Detach the 8 claws and remove the instrument panel finish panel lower center.
    Text in Illustration 
    *A
    for Manual Transmission
    *B
    for Automatic Transmission


8. REMOVE HEATER SWITCH ASSEMBLY (w/ Hot Gas Heater)

  1. E289342
    Detach the 2 claws and remove the heater switch assembly from the instrument cluster finish panel sub-assembly lower center.


9. REMOVE IDLE UP SWITCH (w/o Hot Gas Heater)

  1. E293273
    Detach the 2 claws and remove the idle up switch from the instrument panel finish panel lower center.

← REMOVAL (Oct 2014 – Mar 2016)REMOVAL (from Jan 2017) →