2014-2019 Hiace · Service Manual TRANSMISSION

ADJUSTMENT

Removal / installation · Vehicles built from Jan 2015


1. ADJUST SHIFT LEVER POSITION

  1. C318928
    Remove the clip and nut and disconnect the control shaft lever to transmission control cable assembly from the No. 1 transmission control cable bracket.

  1. C320628E01
    Turn the control shaft lever clockwise until it stops, and then return the control shaft lever counterclockwise 2 notches to N.

  1. C322911
    Move the shift lever to N, and with the cable end lightly pushed toward the front of the vehicle, install the transmission control cable assembly to the transmission control shaft lever LH with the nut.

    Torque:
    15 N*m{ 148 kgf*cm , 11 ft.*lbf }

    HINT:
    Tighten the nut with no slack in the control cable.

  1. Connect the transmission control shift cable assembly to the No. 1 transmission control cable bracket with a new clip.

  1. After adjustment, check the function and operation of the shift lever.

← INSPECTION (from Jan 2015)REASSEMBLY (from Jan 2015) →