2014-2019 Hiace · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT LICENSE PLATE LIGHT ASSEMBLY

  1. B365649E01
    Check the resistance.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Switch ON
      Below 1 Ω
      1 - 2
      Switch OFF
      10 kΩ or higher

      If the result is not as specified, replace the license plate light assembly.
      Text in Illustration 
      *a
      Component without harness connected
      (License Plate Light Assembly)

← DISASSEMBLY (from Jan 2017)ADJUSTMENT (from Oct 2014) →