2014-2019 Hiace · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Oct 2014


1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
  1. Install the rear height control sensor sub-assembly LH with the 3 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

    NOTICE:
    Do not drop the rear height control sensor sub-assembly LH. If it is dropped, replace it with a new one.

  1. Connect the connector.


2. INITIALIZE HEIGHT CONTROL SENSOR SIGNAL
(Click here)
← INSPECTION (from Oct 2014)COMPONENTS (from Oct 2014) →