2014-2019 Hiace · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Jan 2017


1. INSTALL ENGINE OIL COOLER SET
  1. Apply a light coat of engine oil to the 2 new O-rings.

  1. Install the 2 O-rings to the cylinder block sub-assembly.

  1. Install a new water outlet pipe gasket to the cylinder block sub-assembly.

  1. Install the engine oil cooler set to the cylinder block sub-assembly with the bolt and 5 nuts.

    Torque:
    15 N*m{ 153 kgf*cm , 11 ft.*lbf }


2. INSTALL TURBOCHARGER SUB-ASSEMBLY
(Click here)
← INSPECTION (from Jan 2017)ON-VEHICLE INSPECTION (Oct 2014 – Nov 2017) →