2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jan 2017


INSPECT INJECTOR ASSEMBLY
  1. Inspect the injector assembly.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      20°C (68°F)
      0.52 to 0.66 Ω

      HINT:
      The temperature indicated in "Condition" is the temperature of the injector assembly.

      If the result is not as specified, replace the injector assembly.

← REMOVAL (from Jan 2017)INSTALLATION (from Jan 2017) →