2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jan 2017


INSPECT COMMON RAIL ASSEMBLY

  1. A114886E09
    Inspect the fuel pressure sensor.
    Text in Illustration 
    *a
    Component without harness connected
    (Fuel Pressure Sensor)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      5 (PR) - 4 (E2)
      25°C (77°F)
      16.4 kΩ or less
      2 (PR2) - 3 (E2S)
      16.4 kΩ or less
      6 (VC) - 5 (PR)
      3 kΩ or less
      1 (VCS) - 2 (PR2)
      3 kΩ or less

      If the result is not as specified, replace the common rail assembly.

  1. Inspect the pressure discharge valve.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      20°C (68°F)
      0.42 to 0.52 Ω

      HINT:
      The temperature indicated in "Condition" is the temperature of the pressure discharge valve.

      If the result is not as specified, replace the common rail assembly.

← REMOVAL (from Jan 2017)INSTALLATION (from Jan 2017) →