INSTALLATION
Removal / installation · Vehicles built from Jan 2017
| 1. INSTALL NO. 1 VACUUM SWITCHING VALVE ASSEMBLY |
Install the No. 1 vacuum switching valve assembly to the bracket with the screw.
- Torque:
- 1.4 N*m{ 14 kgf*cm , 12 in.*lbf }
Connect the vacuum hose to the No. 1 vacuum switching valve assembly.
| 2. INSTALL VACUUM CONTROL VALVE SET |
Install the vacuum control valve set to the intake manifold with the 2 bolts.
- Torque:
- 10 N*m{ 102 kgf*cm , 7 ft.*lbf }
Connect the 2 vacuum hoses to the vacuum control valve set and No. 2 EGR valve assembly.
Connect the connector to the vacuum control valve set.
