REMOVAL
Removal / installation · Vehicles built from Jan 2017
| 1.
REMOVE VACUUM CONTROL VALVE SET |
 |
Disconnect the connector from the vacuum control valve set.
- Disconnect the 2 vacuum hoses from the vacuum control valve set and No. 2 EGR valve assembly.
- Remove the 2 bolts and vacuum control valve set from the intake manifold.
| 2.
REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY |
 |
- Disconnect the vacuum hose from the No. 1 vacuum switching valve assembly.
- Remove the screw and No. 1 vacuum switching valve assembly from the bracket.