2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jan 2017


INSPECT EXHAUST FUEL ADDITION INJECTOR ASSEMBLY
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    7.1 to 7.9 Ω

    HINT:
    The temperature indicated in "Condition" is the temperature of the exhaust fuel addition injector assembly.

    If the result is not as specified, replace the exhaust fuel addition injector assembly.

← REMOVAL (from Jan 2017)INSTALLATION (Jan 2017 – Nov 2017) →