2014-2019 Hiace · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Jan 2017


1. INSTALL NO. 3 UREA PUMP CONTROL BRACKET
  1. Install the No. 3 urea pump control bracket to the urea pump control ECU with the 2 bolts.

    Torque:
    4.5 N*m{ 46 kgf*cm , 40 in.*lbf }


2. INSTALL NO. 4 UREA PUMP CONTROL BRACKET
  1. Attach the 3 claws and install the No. 4 urea pump control bracket to the No. 3 urea pump control bracket.


3. INSTALL NO. 2 UREA PUMP CONTROL BRACKET
  1. Install the No. 2 urea pump control bracket to the No. 3 urea pump control bracket with the 2 bolts.

    Torque:
    4.5 N*m{ 46 kgf*cm , 40 in.*lbf }


4. INSTALL UREA PUMP CONTROL ECU
  1. Install the urea pump control ECU to the body with the 2 bolts.

    Torque:
    44 N*m{ 447 kgf*cm , 32 ft.*lbf }

  1. A396462
    Connect the connector to the urea pump control ECU.

    NOTICE:
    When connecting a connector, make sure that dirt, water and other foreign matter is not stuck between the connector and urea pump control ECU.


5. INSTALL NO. 1 UREA PUMP CONTROL BRACKET
  1. Attach the 3 claws and install the No. 1 urea pump control bracket to the No. 3 urea pump control bracket and No. 4 urea pump control bracket.


6. INSTALL RADIATOR ASSEMBLY
(Click here)
← REMOVAL (from Jan 2017)INSPECTION (from Jan 2017) →