REMOVAL
Removal / installation · Vehicles built from Jan 2017
| 1.
REMOVE RADIATOR ASSEMBLY |
 |
(Click here)
| 2.
REMOVE NO. 1 UREA PUMP CONTROL BRACKET |
 |
- Detach the 3 claws and remove the No. 1 urea pump control bracket from the No. 3 urea pump control bracket and No. 4 urea pump control bracket.
| 3.
REMOVE UREA PUMP CONTROL ECU |
 |
- Raise the lever while pushing the lock on the lever and disconnect the connector from the urea pump control ECU.
- NOTICE:
- After disconnecting a connector, make sure that dirt, water and other foreign matter does not contact the connector.
- Remove the 2 bolts and urea pump control ECU from the body.
| 4.
REMOVE NO. 2 UREA PUMP CONTROL BRACKET |
 |
- Remove the 2 bolts and No. 2 urea pump control bracket from the No. 3 urea pump control bracket.
| 5.
REMOVE NO. 4 UREA PUMP CONTROL BRACKET |
 |
- Detach the 3 claws and remove the No. 4 urea pump control bracket from the No. 3 urea pump control bracket.
| 6.
REMOVE NO. 3 UREA PUMP CONTROL BRACKET |
 |
- Remove the 2 bolts and No. 3 urea pump control bracket from the urea pump control ECU.