Home › Engine / Hybrid System › 7GR-FKS (ENGINE MECHANICAL) › FRONT CRANKSHAFT OIL SEAL
RM35X0E _51 Engine / Hybrid System _078603 7GR-FKS ENGINE MECHANICAL _0381341 FRONT CRANKSHAFT OIL SEAL A

7GR-FKS ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 11301C 1.INSTALL FRONT CRANKSHAFT OIL SEAL

a.
A436689N01
1.313,1.094 2.406,1.844 2.406,1.844 2.583,1.844 true 2.625,1.75 2.938,1.948 0.313,0.198 10 false SST

Apply MP grease to the lip of a new front crankshaft oil seal.


b.

Using SST and a hammer, tap in the front crankshaft oil seal until its surface is flush with the timing chain cover edge.

SST
09226-10010  

NOTICE:
·

Keep the lip free from foreign matter.

·

Do not tap the oil seal at an angle.




Hide 13471 2.INSTALL CRANKSHAFT PULLEY

Hide 15609 3.INSTALL OIL FILTER BRACKET SUB-ASSEMBLY

Hide 16268 4.CONNECT NO. 1 WATER BY-PASS PIPE

a.
A443670

Connect the No. 1 water by-pass pipe with the 3 bolts and nut.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Connect the 2 water by-pass hoses to the oil cooler assembly, and slide the 2 clips to secure it.


Hide 88704 5.CONNECT SUCTION HOSE SUB-ASSEMBLY (w/ Air Conditioning System)

Hide 88703 6.CONNECT DISCHARGE HOSE SUB-ASSEMBLY (w/ Air Conditioning System)

Hide 8.CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT (w/ Air Conditioning System)

Hide 9. WARM UP ENGINE (w/ Air Conditioning System)

Hide 10.INSPECT FOR REFRIGERANT GAS LEAK (w/ Air Conditioning System)