Home › Brake › PARKING BRAKE › PARKING BRAKE LEVER
RM35X0E _54 Brake _078671 PARKING BRAKE _0381556 PARKING BRAKE LEVER A

PARKING BRAKE  PARKING BRAKE LEVER  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides, except where indicated.

·

The procedure listed below is for the LHD side.



PROCEDURE

Hide 46201E 1.INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY

a.

Pass the No. 1 parking brake cable assembly through the parking brake lever sub-assembly.


b.

Temporarily install the adjusting nut to the No. 1 parking brake cable assembly.


c.
C413227C01
0.948,2.604 1.281,2.604 1.281,2.604 1.281,2.771 true 1.219,2.802 1.385,2.969 0.167,0.167 10 true *a
*a Claw
V113147

Return


Return the claw to its original position.

HINT:

Move the parking brake lever sub-assembly a few times and check for smooth movement.



d.
C413221

Install the No. 1 parking brake cable assembly to the parking brake lever sub-assembly with a new clip.

HINT:

Install the clip with the floor carpet folded back.



e.
C413222N01
2.135,1.323 2.302,1.531 0.167,0.208 10 true 1 0.458,1.823 0.625,2.031 0.167,0.208 10 true 2 1.885,1.656 2.052,1.865 0.167,0.208 10 true 3

Install the parking brake lever sub-assembly with the 3 bolts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)

NOTICE:

Tighten the 3 bolts in the order shown in the illustration.


HINT:

Install the parking brake lever sub-assembly with the floor carpet folded back.



f.

for LHD:

i.
C413279

Connect the parking brake switch connector.



g.

for RHD:

i.
C413281

Engage the clamp and connect the parking brake switch connector.



Hide 46441 2.TEMPORARILY INSTALL NO. 1 WIRE ADJUSTING NUT

a.
C414066C01
0.76,1.021 0.927,1.021 0.927,1.021 1.26,1.688 true 1.344,1.667 1.938,1.135 1.938,1.135 2.104,1.135 true 0.542,0.938 0.771,1.167 0.229,0.229 10 true *1 2.167,1.042 2.396,1.271 0.229,0.229 10 true *2
*1 Lock Nut
*2 No. 1 Wire Adjusting Nut


Temporily install the No. 1 wire adjusting nut and lock nut.


Hide 58997 3.INSTALL NO. 3 CONSOLE BOX MOUNTING BRACKET (except Separate Seat Type)

Hide 4.INSTALL FRONT SEAT ASSEMBLY LH (for Separate Seat Type)

Hide 5.INSTALL FRONT SEAT ASSEMBLY LH (Sliding Bench Seat Type)

Hide 6.INSTALL FRONT SEAT ASSEMBLY RH (Fixed Bench Seat Type)

Hide 58902C 7.INSTALL CONSOLE BOX MOUNTING BRACKET SUB-ASSEMBLY (for Separate Seat Type)

Hide 58904B 8.INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY (except Separate Seat Type)

Hide 9.ADJUST PARKING BRAKE LEVER TRAVEL

Hide 10.INSPECT BRAKE WARNING LIGHT