17410
1.REMOVE FRONT EXHAUST PIPE ASSEMBLY
2.DRAIN AUTOMATIC TRANSMISSION FLUID
32941
3.REMOVE NO. 1 OIL COOLER INLET HOSE AND NO. 1 OIL COOLER OUTLET HOSE
Use a container to catch any ATF.
| *1 | No. 1 Oil Cooler Inlet Hose |
| *2 | No. 1 Oil Cooler Outlet Hose |
Slide the 2 clips and disconnect the No. 1 oil cooler inlet hose and No. 1 oil cooler outlet hose from the No. 1 oil cooler inlet tube and No. 1 oil cooler outlet tube.
Disconnect the hose clamp from the fan shroud.
Slide the 2 clips and remove the No. 1 oil cooler inlet hose and No. 1 oil cooler outlet hose from the radiator assembly.
32921
4.REMOVE NO. 1 OIL COOLER INLET TUBE AND NO. 1 OIL COOLER OUTLET TUBE
Use a container to catch any ATF.
Disconnect the No. 1 oil cooler inlet tube and No. 1 oil cooler outlet tube from the automatic transmission assembly.
Remove the 3 bolts to open the No. 1 automatic transmission oil cooler tube clamp and 2 transmission oil cooler tube clamp sub-assemblies and remove the No. 1 oil cooler inlet tube and No. 1 oil cooler outlet tube.
| *1 | No. 1 Automatic Transmission Oil Cooler Tube Clamp | *2 | Transmission Oil Cooler Tube Clamp Sub-assembly |
Remove the 3 bolts and 3 transmission oil cooler tube clamp sub-assemblies from the automatic transmission assembly and engine assembly.