89677D
1.INSTALL NO. 1 UREA PUMP CONTROL BRACKET
Install the No. 1 urea pump control bracket to the fuel pump control ECU with the 3 screws.
89571
2.INSTALL FUEL PUMP CONTROL ECU
Install the fuel pump control ECU with the 2 bolts.
Connect the 2 connectors.
89678B
3.INSTALL NO. 2 UREA PUMP CONTROL BRACKET
Install the No. 2 urea pump control bracket with the 2 clips.
4.INSTALL FRONT SEAT ASSEMBLY LH
for Separate Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Separate Seat Type)>INSTALLATION
for Fixed Bench Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Fixed Bench Seat Type)>INSTALLATION
for Sliding Bench Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Sliding Bench Seat Type)>INSTALLATION
5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN REPLACING OR REMOVING/INSTALLING PARTS>WORK PROCEDURE
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART